Description
ST-EP1100
ST-EP1100 is a conversion device for Ethernet over Coax. It can be used in pair or one to multi. The equipment can transmit by telephone line, Ethernet cable, UTP or coax, etc all kinds of common cables. Also have the excellent isolation and thunder prevention or anti-jamming function. In the practical project, this device is proved to be of high performance in surge prevention. It transmits IP video or Ethernet up to 1.5km at a max rate 70Mbps over existing coax, thuscut the cost by avoid re-cabling when swapping analogue cameras for IP/Megapixel models. ST-EP1100-AT (AF) series POE version provides one POE port. It is no need for power adaptor and power cord, then be based on POE technology that can supply power for HD cameras, wireless AP, IP telephone equipment over the Ethernet Cable. Our EOC support IEEE802.3af (15.4W) and IEEE802.3at (25.5W) standard. Our ST-EP1100 also support POE power supply. (Local side can supply power over coax cable for the remote side IP camera and equipment.
Features
- Modulation frequency: 2 MHz-28 MHz
- Modulation method: OFDM
- Encryption: AES128-bit encryption
- Networking: One Master and 7 Slaves
- Protocol:IEEE802.3/u 10Base-T, 100Base-TX, IEEE802.1Q VLAN, IEEE802.3af/at
- Support Auto-sensation of MDI/ MDIX at Ethernet port, compatible with NIC, switch and HUB etc.
- Support up to 1522Bytes data packet
- Support Store and forward working mode; backpressure on Half-Duplex and flow control Full-Duplex.
- Power supply range: DC 12V-56V
- Operation temperature: -20-70℃
- Support Ethernet ESD protection and EFT
- POE (15.4W) and POE+ (25.5W) supported (optional)
Parameter | Specification |
Design grade | Commercial Grade |
Rate | 10/100Mbps |
Protocol | IEEE802.3/u、10Base-T、100Base-TX、IEEE802.1Q VLAN、IEEE802.3af/at |
Transmission distance | Coax(SVY75-5): 1.5Km(TCP/IP up to 70Mbps)
Cat 5: 100m |
Port | one RJ45: connected to STP/UTP cat 5
one BNC: Q9 |
Flow control | Duplex: flow control, Half Duplex: Backpressure |
Error rate | <10-9 |
MTBF | 50,0000 hours |
LED indicator | PWR- power,
LAN- link/ Act, Coax- coax cable connection MASTER- master device monitoring |
Power supply | Range:12~56 VDC |
Power | <3W (without POE function) |
Storage humidity | 5%~90% Non-condensation |
Working humidity | 5%~90% Non-condensation |
Working temperature | -20~70℃ |
Storage temperature | -40~85℃ |
Dimension | 94mm×71mm×26mm |
Weight | 0.45kg |
Reviews
There are no reviews yet.