Description
DESCRIPTION
ST-XG101/ XG110 series connect fiber to copper 10Gbps Ethernet, function as fiber-to-copper media converter for long distance transmission. It is a media converter for network backbone (SAN, LAN, MAN), which can be applied in Telecommunication room, R&D laboratory, Data center etc.
Features
- Support Jumbo Frame
- Transparent Transport and very low delay
- Support ITUT prescribed DWDM/CWDM wavelength
- Support DMI function for XFP/SFP+ fiber module
- Support Loopback test function
- Economic In-band Management function
- Powerful Network Management function(Web，SNMP，Console)
- Support hot plugging
- Support 2U Rack (16 channel) and standalone use
- Full State Led display
- Easy installation
- UTP cable length detection(only RJ45 interface)
Specifications
| Parameter | Specifications |
| Transmission Speed | 10Gb/s |
| Protocols | IEEE802.3an(10Gbase-T), IEEE802.3ae(10Gbase-SR/LR/ER/ZR) |
| Access Type | 10G LAN |
| Interface Type | Type: RJ45 To/From XFP or SFP+ |
| Transmission Distance | XFP /SFP+ module: Up to 80Km
10Gbase-T: 100meters Cat .6a cable |
| Maximum Packet
Forwarding Rate |
14,880,950/S |
| Network management
information: |
• Card type information
• XFP/SFP+ fiber module detection • XFP/SFP+ fiber module DMI function（Temperature, Voltage, Optical power ） • Link status detector • Enable/Disabled Loopback test function • UTP cable length detection （ only RJ45 interface ） • Remote card status monitor （ only in pairs ） |
| Power requirement | Rack-mountable : AC 85 ～ 220V OR DC -48V
Standalone: AC 100V~240V OR DC -40~50V Power consumption: ≤9W |
| Work Environment | Operating Temp: 0~ 50 ℃
Storage Temp: -10~ 70 ℃ Humidity: 5%~90% （ non-condensing ） |
| Dimension | Card ： 11.5mm （ W ） × 78mm （ D ）
Standalone ： 156mm （ W ） × 128mm （ D ） × 32mm （ H ） |
Reviews
There are no reviews yet.